Hardwood
Engineered hardwood
Luxury vinyl plank
Laminate
Porcelain tile
Carpet
Shaw
Mohawk
COREtec
PergoFree in-home measure and written estimate: Shaw, Mohawk, COREtec and Pergo lines compared on your own rooms, with carpet, tile, vinyl plank, laminate and hardwood laid out side by side
Get your free estimateTrusted Hardwood Floor Refinishing for Boulder City Homeowners
Hardwood floors in Boulder City take a beating that most flooring advice ignores. Dry desert air pulls moisture out of the boards, and the intense sun through south- and west-facing windows fades the finish faster than it would anywhere milder. Before you rip out solid wood for something new, know this: if the wear layer is still thick enough, a full sand and refinish can bring the surface back without replacing a single board. Our technicians have up to 10 years of experience reading exactly that kind of wear, and we walk every floor with you before anyone touches a sander. For Boulder City homes, start with a free in-home measure and estimate. Call (844) 560-5320.
What Our Hardwood Floor Refinishing Service Includes
Refinishing is a family of jobs, not one job. Some floors need a full strip back to bare wood. Others only need the surface refreshed. We figure out which one your floor actually needs, then quote it in writing before the work is booked.
Hardwood Floor Sanding
Sanding removes the old finish and a thin layer of the wood surface to expose clean, fresh material. You need it when the finish is worn through in traffic lanes, when there are deep scratches, or when the color has gone uneven from sun exposure. We use drum and orbital sanders in staged grits to level the surface without digging into the boards, and we check the wood thickness at the estimate because not every floor has enough material for a full sand.

Hardwood Floor Staining
Staining sets the color of the finished floor, whether you want to keep the original tone or shift it lighter or darker. You need it when the existing color has yellowed, when you’re matching new flooring to old, or when a room refresh calls for a different look. We test stain on a small area of your actual floor first, because wood species and age change how a stain reads, and we never promise a sample will match exactly.

Hardwood Floor Restoration
Restoration covers the repair work that comes before refinishing: filling gaps, replacing individual damaged boards, addressing cupping or edge wear, and stabilizing loose sections. You need it when the floor has more than cosmetic problems. We assess the whole floor at the estimate and tell you plainly whether restoration makes sense or whether replacement is the better spend, and we can install new hardwood alongside a restored section so the finished space matches.

Hardwood Floor Buffing
Buffing scuffs the surface of the existing finish and applies a fresh coat to bring back sheen, without sanding down to bare wood. You need it when the finish is dull but still intact and you want a quick visual lift. It’s a lighter job than a full refinish, and it only works if the current finish is sound; if it’s flaking or worn through, buffing won’t hold.
Screen and Recoat Hardwood Floors
A screen and recoat lightly abrades the topcoat and adds a new layer of finish on top, which can extend the life of a floor that’s only mildly worn. You need it when traffic marks are starting to show but the wood beneath is fine. It’s the least invasive option we offer, and we’ll say so at the estimate if your floor is a good candidate rather than pushing a full sand.
Stair Refinishing
Stairs get refinished on a different schedule than the floor around them, because treads take concentrated foot traffic and the nosing wears first. You need it when the steps look tired next to a freshly finished floor or when the finish on the treads has gone slick and worn. We refinish treads, risers and rails to match the floor, and we work around the layout so the staircase stays safe to use.
Styles & brands we work with
- Hardwood
- Engineered hardwood
- Luxury vinyl plank
- Laminate
- Porcelain tile
- Carpet
- Shaw
- Mohawk
- COREtec
- Pergo
Brands We Service for Hardwood Floor Refinishing
We work with the materials and finishes that come with the flooring brands homeowners already know. Armstrong flooring has a long history in resilient and wood products, and we handle refinishing and recoat work on Armstrong hardwood surfaces with an eye for how that finish was laid down originally. Shaw is one of North America’s major flooring manufacturers, and its hardwood lines show up in a lot of Boulder City homes; when we refinish or restore a Shaw floor, we treat the existing finish and board profile on their own terms rather than applying a one-size approach.
Karndean and Daltile come up more in the surrounding rooms of a renovation, and they matter to a refinishing job when you’re matching new floors to old. If a restored hardwood floor has to sit next to a Karndean luxury vinyl or a Daltile tile installation, we coordinate the color and the transition so the whole space reads as one project rather than three. Whether you have a Shaw, Armstrong, Karndean or Daltile floor, or any other make, we can help.
Signs You Need Hardwood Floor Refinishing Right Now
- Visible wear lanes in high-traffic areas. The finish thins first where feet land most, usually doorways, hallways and in front of the kitchen sink. Once raw wood shows through, water and grit reach the board directly, and that’s when small wear turns into real damage.
- Deep scratches or gouges that catch a fingernail. Surface scuffs are cosmetic. Scratches that catch mean the finish and some wood are gone, and a recoat won’t cover them; the floor needs sanding or spot repair.
- Dull, cloudy or uneven color. Sun fading and years of cleaning can leave a floor patchy, especially near windows. A stain and refinish evens the tone again, and it’s a far cheaper route than replacing boards that are structurally fine.
- Cupping, gaps or boards lifting at the edges. Desert dryness causes seasonal gapping, and moisture from below causes cupping. These are signs the problem is under the surface, so an inspection at the estimate comes before any sanding.
- Finish flaking, peeling or turning white in spots. That’s a failing topcoat, and it will keep spreading. Screen and recoat or a full refinish stops it, and the sooner it’s addressed, the less wood has to come off.
Our Hardwood Floor Refinishing Process – Step by Step
- 1
Free in-home measure and inspection. We walk the floor, check board thickness and condition, look for moisture or subfloor issues, and talk through what you want the finished floor to look like. You get a written estimate with the scope spelled out, and the schedule is set from there.
- 2
Prep and protection. Furniture moves out, adjoining surfaces get masked, and dust containment goes up before sanding starts. We plan the work area and access so the rest of the house stays usable during the job.
- 3
Sanding in staged grits. Coarse grits remove the old finish and level the surface; finer grits smooth it out for an even stain. We check the surface between passes under raking light so scratches and drum marks don’t survive into the finish.
- 4
Stain and finish coats. Stain goes down first if you’re changing color, tested on your actual wood beforehand. Then finish coats go on with the right dry time between them, per the product instructions, so the topcoat cures properly rather than trapping solvent.
- 5
Final walk-through. We inspect the finished floor with you, check edges and stairs, and leave care guidance for the first weeks. Any touch-ups get noted and handled before we call the job done.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Hardwood Floor Refinishing Cost in Boulder City?
Hardwood floor refinishing in Boulder City typically runs $1,800 – $5,000 for a 500 to 800 square foot project, materials and labor included. A screen and recoat sits at the low end because it skips the full sand. A full sand, stain and finish on a larger floor, plus stair refinishing or board replacement, moves toward the upper end. Hardwood refinishing starts at about $3 per square foot, and the price per square foot depends on the product, the room and the subfloor. The written estimate sets the final price.
| Scope | Typical estimated range |
|---|---|
| Screen and recoat (light wear) | Lower end of $1,800 – $5,000 |
| Full sand and finish, standard room | Mid range of $1,800 – $5,000 |
| Sand, stain and finish, plus stair refinishing | Upper end of $1,800 – $5,000 |
| Board replacement and restoration before refinishing | Quoted separately at the estimate |
What affects the price: square footage, how much wood has to come off, whether boards need replacing, the number of stairs, the stain and finish you choose, and how much furniture has to move. To avoid overpaying, get the scope in writing, ask whether the job is a recoat or a full sand, and confirm what’s included. Our free estimate covers the measurement, the condition check and a written quote. Call (844) 560-5320 to schedule yours.
For the rest of the house, see our carpet installation and Boulder City Flooring services, and explore the full range in Boulder City.
Hardwood Floor Refinishing Near Boulder City – Our Service Area
We serve homeowners throughout the area, and we connect you with independent local professionals who do the work. If you’re nearby, we also take refinishing and flooring requests in Henderson and Whitney, with scheduling set at the estimate. Timing depends on the job and the estimate visit, so the written quote is where your install day gets confirmed.
Serving Boulder City, NV – Our Local Coverage Area
We serve Boulder City and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Hardwood Floor Refinishing in Boulder City
Hardwood floor refinishing is the process of sanding off the old finish and a thin layer of wood, then applying new stain and finish coats to restore the surface. It’s a restoration job, not a replacement, and it only works when the boards are thick enough and structurally sound. We check that at the free estimate before quoting, and if a floor can’t be refinished, we’ll tell you why.
There’s no fixed timeline, because the length depends on square footage, the number of coats, and dry time between them. The schedule gets set at the estimate and written into your quote. We plan the work so you know what to expect, and dry times follow the product instructions rather than a guess.
Typical estimated pricing runs $1,800 – $5,000 for a 500 to 800 square foot project, with hardwood refinishing starting at about $3 per square foot. Stairs, board replacement and stain changes can push toward the top of that range. The written estimate sets the final price after we’ve seen the floor. Call (844) 560-5320 for an exact quote; estimates are free.
Yes. We refinish and recoat Shaw and Armstrong hardwood floors, along with floors from other manufacturers. What matters most is the wood itself, its thickness and condition, not the label on the box. We assess that in person before recommending a full sand or a lighter recoat.
We answer 24/7, and fast dispatch from 7am to 7pm. A call outside dispatch hours is booked into the next opening, Sunday through Friday. We’re closed Saturday. Refinishing is a scheduled job, so the plan is a free in-home measure and estimate first, then a written price, then a booked work day.
The finish warranty depends on the product and the home, and the product instructions and the written estimate set those terms. We go over exactly what’s covered before you book. If you have a question after the job, call and we’ll walk through it with you.
Clear the floor of furniture and breakables, and expect to stay off the finished surface while coats dry per the product instructions. We’ll tell you at the estimate which areas get masked and how access works during the job. If you have pets, plan a way to keep them off the work area. Call (844) 560-5320 to set up your free estimate.
Schedule Your Hardwood Floor Refinishing Service in Boulder City Today
If your hardwood is worn, faded or scratched, a free in-home estimate is the fastest way to know whether a refinish is all it needs. We measure, inspect and put the scope in writing, with no obligation to book. Call (844) 560-5320. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Boulder City Flooring.