Pergo
Hardwood
Engineered hardwood
Luxury vinyl plank
Laminate
Porcelain tile
Carpet
Shaw
Mohawk
COREtecFree in-home measure and written estimate: Shaw, Mohawk, COREtec and Pergo lines compared on your own rooms, with carpet, tile, vinyl plank, laminate and hardwood laid out side by side
Get your free estimateWhy Boulder City Homeowners Choose Pergo Flooring
We provide independent Pergo flooring service in Boulder City, NV, and what sets our Pergo work apart is that we treat it as a family of different products rather than one generic laminate. Pergo spans glued and click-lock planks, wood-core lines like Max, XP and Outlast+, and the rigid-core Extreme generation, and each one fails differently, repairs differently, and calls for different underlayment over a desert slab. We diagnose which generation you have before anyone lifts a baseboard.

We’re an independent local service. Boulder City Flooring is not authorized, sponsored, or endorsed by Pergo, and we don’t pose as a dealer. What we offer is hands-on Pergo installation, plank repair, and gap work across Boulder City, backed by technicians who have up to 10 years of experience. Call (844) 560-5320 to schedule a free estimate. Laminate installation in Boulder City typically runs $1,800 – $5,500 for a 500 to 800 square foot project, and the written estimate sets the final price.
That distinction matters in Boulder City specifically. Most of the historic core is 1930s-1950s single-story homes on slab-on-grade, built for dam-era workers, and a lot of these slabs are uneven, cracked, or missing a vapor barrier. Pergo over that kind of slab is a different job than Pergo over new construction plywood, and we plan for it.
Why Trust Boulder City Flooring for Your Pergo Flooring?
Pergo laminate is unforgiving about two things: flatness and movement. Get either wrong and the floor tells you within a season. Our technicians have worked the full range of Pergo generations, from older Pergo Max installs where planks were fastened or glued at the tongue, to XP and Outlast+ click systems, to Pergo Extreme rigid-core planks that behave more like a dimensional board than a traditional laminate. That matters because the diagnosis changes with the generation. A peaking seam on a 12-year-old Max floor and a peaking seam on an Extreme floor are not the same problem and don’t get the same fix.
We use quality parts that fit Pergo flooring: matched replacement planks from current lines, transition and end-molding pieces sized for the floor’s actual thickness, and underlayment chosen for the slab beneath it. On discontinued patterns we match from remaining stock or a close color rather than passing off a different laminate as the same product.
Warranty-safe practice is part of the job, not an afterthought. That means respecting Pergo’s published installation requirements on expansion gaps and subfloor flatness, documenting what we find under the old floor, and leaving the perimeter free to move. Our technicians have up to 10 years of experience doing exactly this in the Boulder City area. Call (844) 560-5320 for a free estimate.
Styles & brands we work with
- Hardwood
- Engineered hardwood
- Luxury vinyl plank
- Laminate
- Porcelain tile
- Carpet
- Shaw
- Mohawk
- COREtec
- Pergo
Common Pergo Flooring Problems We Fix in Boulder City
Pergo problems in Boulder City tend to cluster around dry air, slab moisture, and installation shortcuts that were invisible for years. Here’s what we see most.
- Gapping and peaking at seams. Pergo planks open up and ride over each other when the perimeter expansion gap was undersized or filled with grout, caulk, or tight baseboard. Boulder City’s humidity swings hard from season to season, and a floor that can’t move has to buckle somewhere. It usually picks the longest run, often in front of a sliding door.
- Edge swelling and raised seams. On older Pergo Max and XP planks, moisture reaching the core through a tub overflow, a swamp cooler drip, or vapor coming up through an unsealed slab swells the edges and lifts the seams. Once the core swells, that plank doesn’t come back down. It gets replaced.
- Worn or chipped wear layers. High-traffic doorways and the strip in front of south- and west-facing sliding glass doors take the worst of it in a desert house. Sun through that glazing plus grit underfoot can wear the AC3 or AC4 surface and eventually the printed color beneath it. That’s cosmetic wear in a small area, and a targeted plank swap handles it.
- Sheared click-lock tabs at plank ends. Furniture dragged across a click floor can snap the locking tabs at the plank ends, and so can an install where the subfloor wasn’t flattened to Pergo’s tolerance first. A floor that moves underfoot when you walk it usually has broken tabs somewhere in the run.
- Old glued-down planks coming loose. The original bureau-era homes in Boulder City sometimes have flooring glued directly to the slab, and older Pergo runs followed the same pattern. Adhesive releases over decades of slab movement, and the result is hollow-sounding, lifting planks with no realistic way to re-bond them.
A typical call involves Pergo laminate that has opened up at the seams along a wall or in front of a slider, often with one or two planks visibly peaking where they butt against the baseboard. The usual cause is an expansion gap that got filled with grout, caulk, or tight baseboard during the original install, so the floor has nowhere to move in dry desert air and starts to buckle instead. A qualified installer pulls the baseboard and a row of planks, checks the slab for flatness and moisture, re-cuts the perimeter gap, replaces any planks with broken locking tabs using matched stock, and re-sets the run with a proper underlayment.
Pergo Parts & Our Repair-vs-Replace Approach
Pergo makes replacement planks and transition and end-molding pieces for its current lines, and that’s the first place we look. We don’t stock OEM or genuine Pergo parts, and we won’t tell you we can order them indefinitely. What we do is source quality parts that fit your floor, match your existing pattern as closely as the current market allows, and tell you plainly when a match isn’t going to be exact. Once a pattern is discontinued, no one can manufacture it back into existence, and you deserve to hear that at the estimate rather than after the install.
The repair-versus-replace call comes down to how much of the floor is actually damaged. On a Pergo Extreme or XP floor with a few bad planks, a targeted plank swap plus an expansion-gap reset is usually the honest answer, and it keeps most of your existing floor in place. On a floor that’s swelled, gapping, and spongy across an entire room, there’s no refinishing step to bail it out. Laminate has a printed wear surface, not a sandable wood layer, so resurfacing isn’t an option. Replacing the affected run is the real fix, and we’ll tell you so.
Call (844) 560-5320 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Our Pergo Service Process – Step by Step
- 1
Diagnosis at the floor, not on a form. We identify the Pergo generation, pull a transition or baseboard to expose the perimeter gap, and check the slab for flatness and moisture. On 1930s bureau-era homes in Boulder City this is where we find the surprises: no vapor barrier, old adhesive, sometimes asbestos-era materials under the original finish floor.
- 2
Repair or installation. For a repair we re-cut the perimeter gap, swap broken-tab and swelled planks with matched stock, and re-set the run. For an installation we flatten the subfloor to Pergo’s tolerance, choose underlayment for the slab underneath, and leave the expansion gap the floor actually needs.
- 3
Test and walk the floor. We check for movement underfoot, listen for hollow planks, verify transitions sit flush, and confirm doors still clear the new floor height. A floor that moves when you walk it isn’t finished.
- 4
Warranty paperwork and care notes. You get the product and subfloor details recorded for your files, plus care guidance tuned to dry desert air. Jumping a floor without paperwork makes a future warranty conversation harder than it needs to be.
See the difference
Before
After
Before
After
Before
AfterPergo Products We Service & Install in Boulder City
We work on the Pergo generations that actually exist in Boulder City homes. Pergo Extreme, the rigid-core waterproof SPC laminate, behaves differently from traditional laminate and gets repaired differently. Pergo Max covers a wide span of installs, including older glued and early click floors. Pergo XP, including XP with SpillGuard, is the click-lock line we see most often where water reached a seam. Pergo Outlast+ is the waterproof laminate we install and repair with particular attention to the perimeter and transitions.
We install new Pergo over properly prepared subfloors and repair existing Pergo floors. We don’t sell flooring from a showroom and we don’t stock product. We install and service the floor you choose, which means our advice isn’t tied to moving inventory.
We Also Service These Brands
Pergo is one of nine brands we work with, not the only one. We also install and service COREtec’s rigid-core vinyl, Shaw and Mohawk carpet, Mannington and Armstrong resilient, LifeProof laminate, Karndean luxury vinyl, and Daltile tile. If your renovation mixes a Pergo room with a tile bath or a carpeted bedroom, one contractor can handle all three, and you’re not coordinating separate trades across a whole-home project.
FAQs – Pergo Flooring Service in Boulder City
No. We are an independent Pergo service provider. We are not authorized, sponsored, endorsed, or certified by Pergo, and we’re not a Pergo dealer. We install and repair Pergo flooring using practices that respect the manufacturer’s published installation requirements, and we tell you plainly which parts come from Pergo’s current lines and which are matched alternatives.
Yes. We use replacement planks and transition and end-molding pieces sized for your floor’s actual thickness, plus underlayment chosen for the slab beneath it. We don’t claim to stock OEM or genuine Pergo parts, and we don’t claim to be factory-trained. What we do is match your pattern as closely as the market allows and say so when a discontinued match won’t be exact. Call (844) 560-5320 for a free estimate.
A targeted plank swap and gap reset is typically a single-day job once materials are on hand. Whole-run replacement and new Pergo installation are scheduled jobs: a free in-home measure and estimate first, then a written price, then a booked install day. The estimate visit sets the schedule, and we don’t promise same-day installation. Call (844) 560-5320 to start with the estimate.
We cover Pergo Extreme rigid-core SPC laminate, Pergo Max, Pergo XP including XP with SpillGuard, and Pergo Outlast+ waterproof laminate. Because those generations use different joint systems and cores, the first step on any job is identifying which one you have. That identification drives the whole repair plan.
Service doesn’t automatically void a Pergo warranty, but what happens during the job can affect a future claim. Pergo’s warranty terms depend on the product and the installation conditions, so we follow their published requirements on expansion gaps and subfloor flatness and record what we find under your floor. We can’t speak for Pergo’s warranty decisions, and we’ll tell you what documentation you should keep.
Typical estimated installed prices in Boulder City for a 500 to 800 square foot project are $1,800 – $5,500 for Pergo laminate installation and $250 – $1,500 for floor repair such as a plank swap and gap reset. Tile runs $3,000 – $9,000 and vinyl plank $2,400 – $6,500. Price per square foot depends on the product, the room, and the subfloor, and the written estimate sets the final price. Call (844) 560-5320 for an exact quote; estimates are free.
| Service | Typical Estimated Range |
|---|---|
| Laminate Flooring Installation (Pergo) | $1,800 – $5,500 |
| Floor Repair (plank swap, gap reset) | $250 – $1,500 |
| Tile Flooring Installation | $3,000 – $9,000 |
| Vinyl Plank Flooring Installation | $2,400 – $6,500 |
These are typical estimates for a 500 to 800 square foot project, not per-square-foot prices. Floor repair is priced per job, and the written estimate sets the final price.
Book Your Pergo Service in Boulder City, NV
Whether your Pergo floor is peaking at the seams, swelling at an edge, or you’re planning a new install over a historic Boulder City slab, start with a free estimate. Call (844) 560-5320. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. We’ll identify your Pergo generation, check the slab, and give you a written price before any work begins.
Written by the team at Boulder City Flooring.